General Information; Purpose Of The Manual; Manufacturer And Machine Identification - Bartscher BMS1781 Manuel D'emploi Et D'entretien

Purpose of the manual

This manual was written by the Manufacturer and is an integral part of machine equipment. During design
and construction the Manufacturer has carefully considered possible hazards and personal risks that may
result from interaction with the machine. In addition to observing the specific laws in force, the manufacturer
has adopted all "exemplary construction technique principles". The purpose of this information is to advise
the users to use extreme caution to avoid risks. However, discretion is invaluable. Safety is also in the hands
of all the operators who interact with the machine. Keep this manual in a suitable place, always within reach
for consultation. The following symbols are included to better stress some passages:
DANGER – WARNING: indicates hazards that may cause serious damages; attention is
INFORMATION: indicates particularly important technical information.
The following is enclosed with this manual:
- Warranty certificate describing the Manufacturer's warranty conditions.
Documents that prove conformity with effective health and safety laws.
-
Contact the Authorised dealer for any service request, information or spare parts order.

Manufacturer and machine identification

Manufacturer Identification
Machine model
Technical specifications
INFORMATION
required.
4
GENERAL
Conformity markings
Serial number
1