Publicité
Les langues disponibles
Les langues disponibles
Connecting the gas bottle
Instructions for use
Ignition:
EN
1. Push down the control knob.
2. While pressing, turn the control knob to the ignition position (lightning).
3. While knob is in this position press the ignition button several times
4. Keep the control knob pressed for 10-15 seconds
5. Move the control knob to the desired setting between
If the flame fails to remains lit, repeat the procedure, keeping the control knob pressed in for a few extra
seconds.
4
1 = main tap
2 = pressure regulator
3 = gas hose
4 = gas bottle
Attach the pressure regulator to the gas bottle using
the large brass nut. Always ensure that the rubber
sealing washer is present in the nut. (NB. This rubber
washer is not required for UK-type pressure regu-
lators). Tighten the nut well. Note that the nut has
a left-hand thread. Check the connections for leaks
using a soap and water solution.
and
.
Publicité
