Torch With Remote Control; Secondary Parameters Menu - LORCH Basic Manuel D'utilisation

4

Torch with remote control

Fig. 2: Torch PowerMaster
B1
Torch display
Indicates the main parameter values and parameter
abbreviations (independently of the 7-segment dis-
plays A4 and A12).
A = Welding current
U = Welding voltage
F = Wire feed speed
B2
Torch rocker
Changes the main parameter values (depending on
which value is shown on torch display B1).
B3
Mode torch button
Press briefly to display the main parameter abbrevia-
tion on torch display B1.
Press briefly again within 2 secs to switch to the next
main parameter.
The Mode torch button is blocked during the welding
process
- 16 -
B1B2 B3
909.3039.9-02

Secondary parameters menu

5 Secondary parameters menu
 Press the Menu button A2 for 2 sec.
9 You are now in the Auxiliary Parameters menu.
 Use the rotary knob A41 to select the desired secondary
parameter.
 Use the rotary knob A44 to set the desired value.
 Save the set value by pressing the Save button A14.
 Exit the Secondary parameters menu by pressing the
Menu button A2.
‰ The following secondary parameters are available, de-
pending on the selected welding process and operating
mode.
Parameter
G-- Gas pre-flow time
CrF Creep speed
StE Start energy
StF Start feed
StU Start voltage
Stt Start time
StS Start slope time
Son Spot/interval welding
time (Spot on)
SoF Spot/interval pause
time
(Spot off )
2.F Secondary feed
2.U Secondary voltage
2.S Secondary slope time
CFS Crater filling slope time
CFF Crater filling feed
CFU Crater filling voltage
CFt Crater filling time
bbt Burnback time
AEd Welding end detection
--G Gas post-flow
Tab. 1: Secondary parameters
 Exit the Secondary parameters menu by pressing the
Menu button A2.
Standard
Range
value
s 0.1 0,0...99,9
m/ 1.0 0,5...25
min
% 50 (TIG) 10...200
100 (MIG-
MAG)
125 (MMA)
m/
3,5 0,5...25
min
V 18 10...45
s
0,1 (TIG) 0,0...99,9
1,0 (MMA)
s 0.2 0,0...99,9
s 1.0 0,1...99,9
s 1.0
0,1...99,9
m/ 3.5
0,5...25
min
V 18 10...45
s 0.2 0,0...99,9
s 0.5
0,0...99,9
m/ 3.5
0,5...25
min
V 18 10...45
s 1.0
0,0...99,9
% 100
0...400
% 100 0...200
s 0.5 0,1...99,9
01.20