Sony SU-PW3M Mode D'emploi page 14

When removing the TV
To Sony Dealers
1
Unplug the mains lead from the
wall socket.
2
Remove all four securing screws
secured in step 4 of procedure
4 on page 12.
3
Be sure that two or more
persons hold the TV and slide it
upward to remove the TV.
WARNING
• Be sure that two or more persons hold the TV
when carrying it.
• Be careful not to allow the leads and cables to
get hung up when removing the TV.
• Be careful not to hurt your hands or fingers
when removing the TV.
Note
Always hold the TV by the non-transparent parts at
the top and bottom of the TV when carrying it.
14
(GB)
When connecting the
external equipment to
the TV after installation
To Customers, Sony Dealers
1
Tilt the TV upward.
1 Unplug the mains lead.
2 Unfasten the two securing screws at the
bottom of the Mounting Rack which were
secured in step 4 of procedure 4 on page 12.
3 Hold the bottom left and right of the TV and
gradually lift it upward.
Notes
• Do not hold the transparent part of the TV.
• Do not let go of the TV while lifting it, otherwise
the TV may hit the wall and cause damage.
4 Confirm the two support braces of the Plate
Unit are locked into the bottom left and right
hooks on either side of the Mounting Rack.
5 Insert the screws removed in step 2 into the
screw holes on the outer sides of the bottom
left and right hooks of the Mounting Rack
and tighten firmly to lock the support braces.
2
3
Screw hole for fixing
the support braces
5
Support
braces
4