Sony SU-PW3M Mode D'emploi page 10

Step 4:
Preparing for the
installation of the TV
1
Remove the screws that hold the
TV to the Table-Top Stand.
2
Detach the TV from the Table-
Top Stand, and place the TV,
with its screen facing down, on
a floor covered with a soft cloth.
Note
Be sure that two or more persons hold the TV when
carrying it. Do not hold the transparent parts at either
the top or bottom of the TV.
10
(GB)
3
4
Anchor
attachment
Remove four screws on the rear
side of the TV.
Soft cloth
Attach the supplied four hooks
with the four supplied screws
(+PSW5 × L14).
Notes
• When using an electric screwdriver, set the torque
setting to approximately 2 N·m.
• Do not place the TV face down for an extended
period as damage may occur to the front surface.