Sony SU-PW3M Mode D'emploi page 12

3
Connect the mains lead and the
connecting cable(s) supplied
with the TV to the TV.
Connect the mains lead and the connecting
cable(s) to the connectors on the rear side of the
TV. For details on connecting the mains lead and
the connecting cable(s), refer to the instruction
manual of the TV.
When you route the lead and the cable in the
wall, feed them through the hole you bored
(page 17).
Hole for cable routing
12
(GB)
4
Install the Mounting Rack (with
the TV) onto the Plate Unit.
1 Hold the Mounting Rack so that the two
centre notches on either side touch the
support braces of the Plate Unit.
2 Gradually lift the Mounting Rack and TV
upward keeping the centre notches engaged
with the support braces of the Plate Unit.
Hitch the upper left and right hooks of the
Mounting Rack onto the anchor bars at the
top of the left and right stabiliser arms of the
Plate Unit.
3 Confirm the four upper hooks are firmly
hooked onto the two anchor bars of the Plate
Unit and that the support braces are secured
in the centre notches of the Mounting Rack.
4 Firmly tighten all four upper and lower
screws (+B6 × L20, supplied) on each side of
the Mounting Rack.
2
1
Side view
Plate Unit
Support brace
Mounting Rack
Mounting Rack
with the TV
2
1