Display - Ingeteam INGECON SUN 3Play Série Manuel D'installation

Ingeteam

10.2. Display

The main display shows different inverter data:
B
A
2019-07-09 2019-07-09
D
Main screen for INGECON SUN 3Play TL
A. Current date, YYYY-MM-DD.
B. Power reduction percentage and reason for this reduction*.
C. Current time, hh:mm.
D. Voltage and power of the PV array. Both pieces of data are displayed alternately.
E. Power, voltage and current fed to the public grid.
F. Wattmeter for instantaneous self-consumption / INGECON EMS Manager. Relative to the self-
consumption or diesel grid mode selected, the wattmeter symbol or INGECON SUN EMS Manager will be
displayed. If it flashes, this is due to a communication failure with the device.
Pressing the key takes you to the main menu. Pressing the key
displays the energy graph for the last 24 days.
* The reasons for power reduction are as follows:
A: Configuration. The inverter is configured to limit its power.
C: Communications. The inverter is limiting the power after having received a reduction setpoint through
communications.
F: Grid frequency. The inverter is limiting the power due to the grid frequency variation.
M: Reserved mode.
Q: Reactive priority. The inverter is limiting the power due to the injection of reactive power.
R: Initial connection ramp. The inverter is limiting the power after a reconnection to the grid.
S: Self consumption mode. The inverter is limiting the power due to functioning in self consumption
mode.
T: Temperature. The inverter is limiting the power due to internal overheating.
V: Grid voltage. The inverter is limiting the power due to the grid voltage variation.
98
A
C
10:17 10:17 2019-07-09 2019-07-09
F E
B
D
Main screen for INGECON SUN 3Play TL M
displays the daily power graph. Pressing
ABO2011IQM01_C - Installation and Operation Manual
Display control
C
10:17 10:17
F E