Ingecon Sun 3Play Tl M; Dc Connection Process; Ingecon Sun 3Play Tl - Ingeteam INGECON SUN 3Play Série Manuel D'installation

Ingeteam
Furthermore, for sizing the wire, keep in mind the range of admitted diameters by the M25 packing glands
supplied by Ingeteam installed in the unit. This range is from 7 ~ 17 mm.
9.2.2. INGECON SUN 3Play TL M
11TL M
11 A
Below we indicate the admitted section limits in the connections. The minimum sections indicated may not be
enough relative to the type of installation, so the installer must size the wiring relative to its needs.
11TL M
The unit is delivered with 15 Adc 1000 V fuses.

9.3. DC connection process

9.3.1. INGECON SUN 3Play TL
1. Uninstall the polycarbonate guard.
2. Pass a cable through each packing gland and guide it to the corresponding terminal. If the cable used has
a diameter of between 7 and 11.5 mm, use the reducer that comes with the packing gland. If the cable
has a diameter of between 11.5 and 17 mm, discard this reducer.
3. Make the connection with a screw terminal marked with the polarity and numbering of the PV array. These
terminals are marked as XPV1+ and XPV1- in INGECON SUN 3Play TL and as XPV1+, XPV1-, XPV2+
94
Maximum DC current input in INGECON SUN 3Play TL M
20TL M
11 A
DC input gauges in INGECON SUN 3Play TL M
20TL M
1.5 ~ 10 mm
33TL M
11 A
33TL M
2
ABO2011IQM01_C - Installation and Operation Manual
DC connection
40TL M480
11 A
40TL M480