Heat Protection; External Influences; Safety Measures; Modifications - Mettler Toledo InTrac 785 Instructions D'utilisation

18
© 07 / 12 Mettler-Toledo AG, CH-8606 Greifensee
Printed in Switzerland

2.10.6 Heat protection

Danger! The housing is not equipped with heat protection. During steam-sterilization procedure
or very hot process media, the surface of the housing can reach high temperatures and cause
burns.

2.10.7 External influences

Attention: Objects falling on the housing can damage or destroy the unit, or cause leaks etc.
Attention: Lateral forces may damage or destroy the unit.
2.11

Safety measures

Attention: Always observe and comply with local laws and regulations!
These are not an integral part of this Instruction Manual.
Danger! It is principally necessary to wear protective equipment such as protective goggles
and protective clothing.
Attention: The operator is responsible for the instruction of personnel. Additional copies of this
Instruction Manual can be ordered from the equipment supplier. As an integral part of the retrac-
table housing, this Instruction Manual must at all times be readily accessible to users at the
point of operation of the housing.
The operator is obliged to inform the supplier/manufacturer of the retractable housing immedia-
tely about any safety-relevant incidents, or observations made, during use of the housing.
Danger! Incorrect manipulation and/or instruction errors can lead to potential hazards for
persons and for the environment.
Attention: Before every start-up, the retractable housing must be checked for:
– damage to the connections, fastenings, etc.
– leakage
– defective cables and lines etc.
– authorization for use of the housing in conjunction with the associated plant resources.
Danger! A defective housing must never be installed or put into operation. Poor containment,
leaky connections etc. or non-compliant installation of the housings can lead to escape of
process medium and thereby to a potential threat to life (incl. risk of explosion.).
2.12

Modifications

Attention: No attachments or modifications to the retractable housings are allowed.
Danger! The manufacturer/supplier accepts no responsibility for any damage caused by
un authorized attachments and alterations or for the incorporation of spare parts which are not
of METTLER TOLEDO provenance. The risk is borne entirely by the operator.
InTrac ® 785
InTrac ® 785
52 403 859