Responsibilities Of Personnel; Selection And Qualifications Of Personnel - Basic Duties - Mettler Toledo InTrac 785 Instructions D'utilisation

Le support rétractable
Masquer les pouces Voir aussi pour InTrac 785:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14
© 07 / 12 Mettler-Toledo AG, CH-8606 Greifensee
Printed in Switzerland
2.8.2

Responsibilities of personnel

– All persons whose duty it is to operate the retractable housings are under obligation to
read Section 1 «Introduction» and Section 2 «Safety» as well as the warning notices in this
Instruction Manual.
– In addition to the Instruction Manual, generally valid legal and other binding regulations for
work safety and accident prevention must be adhered to.
– Any method of working which is doubtful from a safety perspective and which exceeds the
operation according to regulations must be omitted.
– High-pressure jets may not be used to clean polymer/plastic parts and components of the
housing.
Attention: Before every start-up, the retractable housing must be checked for:
• damage to the connections, fastenings, etc.
• leakage
• perfect functioning
• authorization for use in conjunction with other plant equipment and resources.
Danger! A defective retractable housing may neither be installed nor put into operation.
Faulty containment or installation out of conformance with regulations and instructions can lead
to the escape of medium or to pressure surges (explosion), potentially harmful both to persons
and to the environment.
2.8.3
Selection and qualifications of personnel – basic duties
– Work on or with the retractable housings may only be carried out by reliable and appropria-
tely trained or instructed personnel. The personnel must have read this Instruction Manual in
advance.
– Clear responsibilities must be established for the personnel entrusted with operation, service,
repair, etc. of the housings.
– It must be ensured that only specifically assigned personnel may operate the housings.
Danger! Incorrect manipulation or operation of the housings or non-observance of safety regu -
lations can lead to problems with the housings and to the escape of process medium, thereby
presenting a potential hazard to the environment, personnel and material.
InTrac
®
785
InTrac
®
785
52 403 859

Publicité

Table des Matières
loading

Table des Matières