Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.3 Running water through the appliance
1. Make sure there is no filter with coffee grounds in the appliance and
the coffee jug
is clean.
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
2. Remove the coffee jug
.
1
2
3
4
5
6
3. Fill the coffee jug
up to the "10" mark with cold tap water.
1
2
3
4
5
6
7
8
CAUTION!
To avoid damaging the appliance only fill the water
tank with cold tap water.
4. Pour the water into the water tank
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
5. Place the coffee jug
on the hotplate
1
2
3
4
1
5
2
6
3
7
6. Plug the power plug
into the socket.
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
 The appliance switches on automatically.
7. Press the "
" button.
 The "
" button turns blue and indicates that the grinder is
switched off.
8. Press the " " button.
 The " " and "
" buttons will light up. The water heats up and
runs through the appliance. Wait until the appliance beeps 3 times
and the "
" symbol goes out.
9. Press the " " button to switch off the hotplate
1
10. Empty and clean the coffee jug
1
2
3
4
7
8
9 10 11 12 13 14 15 16 17 18
9 10 11 12 13 14 15 16 17 18
.
.
4
8
5
9 10 11 12 13 14 15 16 17 18
6
7
8
9 10 11 12 13 14 15 16 17 18
.
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
.
5
6
7
8
9 10 11 12 13 14 15 16 17 18
7.4 Descaling the appliance
All hot water devices need descaling depending on the water hardness and
how often the device is used. Warranty claims cannot be made for a device
that is not functioning due to a failure to descale it properly.
The device is equipped with a descale reminder after 200 brew cycles. All
the indicators on the display will flash at this point. Descaling should then
be carried out as soon as possible. If the drinking water is very hard, you
will need to descale the device earlier. If the brewing time increases or the
device becomes noisier, this is a sure sign that the coffee machine needs to
be descaled.
The descale reminder will disappear once the device has been descaled and
has gone through two rinsing cycles or three coffee brewing cycles.
1. Make sure there is no filter with coffee grounds in the appliance and the
coffee jug
is clean.
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
2. Remove the coffee jug
.
1
2
3
4
5
6
3. Fill the coffee jug
up to the "10" mark with cold tap water.
1
2
3
4
5
6
7
8
4. Pour the water into the water tank
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
5. Pour 80 ml of vinegar into the water tank
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
6. Place the coffee jug
on the hotplate
1
2
3
4
1
5
2
6
3
7
7. Plug the power plug
into the socket.
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
 The appliance switches on automatically.
8. Press the "
" button.
 The "
" button turns blue and indicates that the grinder is
switched off.
9. Press the " " button.
 The " " and "
" buttons will light up. The entire water/vinegar
solution runs through the appliance. Wait until the appliance beeps
3 times and the "
" symbol goes out.
7
8
9 10 11 12 13 14 15 16 17 18
9 10 11 12 13 14 15 16 17 18
.
.
.
4
8
5
9 10 11 12 13 14 15 16 17 18
6
7
8
9 10 11 12 13 14 15 16 17 18
GB
31
Publicité
Chapitres
Table des Matières
Dépannage
