Diagnostic-Led; Operating Conditions - DoorBird A1081 Série Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If you have problems adding the device to the App please check if the device
is online (www.doorbird.com/checkonline). If the device is not online, please
check the WiFi or network cable connection again.

DIAGNOSTIC-LED

You can see if the device is powered on by checking the Diagnostic-LED,
which lights up about 30 to 60 seconds after the power is connected.
DIAGNOSTIC-SOUNDS
The device emits brief diagnostic sounds about 30 to 60 seconds after it has
been connected to power.
TECHNICAL SPECIFICATIONS
Dimensions
Power supply
Operating
conditions
Connectors
PoE
System
requirements
16
122 x 86 x 32 mm (L x W x H)
4.8 x 3.39 x 1.26 in (L x W x H)
15 V DC or power over Ethernet (PoE 802.3af mode A)
-25 to 55°C / -13 to 131°F
Humidity 10 to 85 % RH
(non condensing)
SMA, RJ45 (10/100 Base-T) for LAN/PoE, 12-pin screw
terminal for
• 15 V DC input (+, -)
• Bi-stable latching relay #1, max. 24 V DC / AC, 1 A
• Bi-stable latching relay #2, max. 24 V DC / AC, 1 A
• Bi-stable latching relay #3, max. 24 V DC / AC, 1 A
• External input 1 (potential-free)
• External input 2 (potential-free)
2.4 GHz, 802.11 b/g/n, external antenna
IEEE 802.3 af/at (Mode-A)
Mobile end device: latest iOS on iPhone/iPad, latest
Android on smartphone/tablet
Internet: High-speed landline broadband Internet
connection, DSL, cable or fiber, no socks or proxy server
Network: 802.11 b/g/n 2.4 GHz or Ethernet Network, with
DHCP
Compatible with all DoorBird IP Video Door Stations.

Publicité

Table des Matières
loading

Table des Matières