Downloading And Installing The App; Diagnostic-Led - DoorBird D21 Serie Manuel D'installation

8
ASSEMBLING THE FRONT PANEL
Assemble the front panel of the device to the
mounting housing (backbox) of the device.
1.) Pull the front
2.) Push the
panel into the
front panel
mounting
up.
housing
(backbox)
9
ACTIVATING THE DEVICE
Switch on the power leading to the assembly location
again. If you use PoE, make sure to switch on power
of the PoE-Switch or PoE-Injector you have connected
the device to.
Do not power the device simultaneously via
NOT IC E
the power supply from the power supply
unit (mains adaptor) and the power supply
via PoE.
You can see if the device is powered by checking the
Diagnostic-LED, which lights up after about 30 to 60
seconds after the power is connected. The device is
ready for operation (booting up process, any software
updates, etc.) once it has emitted a short diagnosis
sound from the integrated loudspeaker. This may last
for up to 5 minutes. If the Diagnostic LED does not
light up, please check the power supply. Please
also check whether you have used a wall-plug power
supply and not PoE and whether you have connected
the positive pole and negative pole to the device
correctly.
10
Download the "DoorBird" App by Bird Home Automation
onto your mobile device from the Apple App Store
or Google Play Store. You can always find the most
up-to-date version of the App manual on
www.doorbird.com/support
Go to DoorBird App "Settings > Add device" and click
on the QR code icon in the "User" field. Scan the user
QR code found on the "Digital Passport" provided
with the device.
If you have problems adding the device to the App,
please check if the device is online
(www.doorbird.com/checkonline). If the device is not
online, please check the network connection and the
power supply of the device.
3.) Insert the

DIAGNOSTIC-LED

security
screws.
You can see if the device is powered by checking the
Diagnostic-LED, which lights up after about 30 to 60
seconds after the power is connected.
DIAGNOSTIC-SOUNDS
After around one to five minutes, the device emits
brief diagnostic sounds after it has been connected
to the power grid.
MOTION SENSOR
The device has a built-in Motion Sensor with 4D
Technology. You can use it for numerous applications,
e. g. to send an alarm to a mobile device or to switch
a relay to turn on an outdoor light.
RFID READER
The built-in RFID reader can be used for many
applications, e.g. to open/lock doors or arming/
disarming your alarm system. For security reasons,
the RFID reader has a very short range (0 - 3 cm,
0 - 1.18 in), so you must place the compatible RFID
tag (key fob) very close to the RFID reader. You can
configure the RFID reader using the DoorBird App.
API
The device features a well documented API for
third-party integration. For information, terms and
conditions see www.doorbird.com/api
DOORBIRD CONNECT
The device features many options to integrate it into
third-party applications. For information, terms and
conditions see www.doorbird.com/connect
DOWNLOADING AND INSTALLING
THE APP
The RFID reader works only on short
distance, for security reasons.
11