DoorBird A1081 Série Manuel D'installation page 13

max. 24 V, 1 A
PORT
LAN/POE
REL1, REL1
REL1
REL1
REL2, REL2
REL2
REL2
REL1 REL2 REL3
max. 24 V, 1 A
DESCRIPTION
RJ45 jack to connect a standard Network cable Cat.5
or better, coming from the Internet Router/PoE-Switch/
PoE-Injector.
Do not power the device simultaneously via
NOTI C E
the power supply from the power supply unit
(mains adaptor) and the power supply via PoE.
Bi-stable latching relay #1 (potential-free),
max. 24 V DC/AC, 1 A. Security feature: The relay keeps
its state even in the case of loss of power. You can
configure the default state of the relay (open/close) via
the DoorBird App. These ports can be used to connect
e.g. an electric door opener. The device does not supply
power to the connected device. The power supply for the
electric door opener must be installed separately.
Bi-stable latching relay #2 (potential-free),
max. 24 V DC/AC, 1 A. Security feature: The relay keeps
its state even in the case of loss of power. You can
configure the default state of the relay (open/close) via
the DoorBird App. These ports can be used to connect
e.g. an electric door opener. The device does not supply
power to the connected device. The power supply for the
electric door opener must be installed separately.
max. 0 V, 0 A
15 V DC, 1A
EXT1 EXT2 15VDC
max. 24 V, 1 A
13