Functional Description; Intended Use; Noise/Vibration Information; Product Features - Bosch PFS 105E Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
OBJ_BUCH-420-001.book Page 20 Tuesday, February 12, 2008 8:15 AM
20 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The power tool is intended for atomising sol-
vent-based and water-dilutable paints, finishes,
primers, clear finishes, automotive finishes,
staining sealers, wood sealer-preservatives,
plant protectives, oil and disinfection agents.
The power tool is not suitable for spraying dis-
persions and latex paint, caustic solutions, acid-
ic coating materials, coating materials with
granules or solids as well as spray and drip-im-
peding materials.
Use the machine only when you can fully assess
all functions and handle them without limita-
tion, or after having received appropriate in-
structions.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 74 dB(A). Uncertainty K=1,5 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
The hand-arm acceleration is typically below
2
2.5 m/s
.
1 609 929 L50 | (12.2.08)

Product Features

The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Spray gun
2 Air cap
3 Union nut
4 Mark for SDS connection
5 Thumbwheel for spraying capacity
6 Hose port (spray gun)
7 Handle extension
(only for 800 ml container)
8 Container for spray material, 800 ml
Container for spray material, 600 ml*
9 Trigger switch
10 Suction tube with container seal
green: for 800 ml container
white: for 600 ml container*
11 Nozzle
12 Nozzle seal
13 Air hose
14 SDS connector
15 Base unit
16 Control knob for On/Off and air-flow control
17 Set-down port for spray gun
18 Hose connection (base unit)
19 Handle
20 Accessory compartment
21 Air filter cover
22 Measuring cup
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools

Publicité

Table des Matières
loading

Table des Matières