Publicité
English
Installation of stove with swivel base
Stoves can be delivered with and without swivel mount.
If the stove is delivered with a swivel mount, the swivel base is mounted below the
stove and fixed with two transport screws (wing screws)
The swivel base can be installed to:
• rotate 90° (45° to each side) – (setting on delivery)
• rotate 360°
Open the front by pulling out the hatch and lifting it.
The swivel base lock (spring) can be
tightened by loosening the screw to
adjust the mounting and move the
mounting towards the plus mark. Re-
member to retighten the screw.
Remove the two wing screws. The
stove will now rotate 45° in each direc-
tion.
For setting the swivel base to 360°.
Remove the stop screw. The stove will
now rotate freely.
D M Y
Change order
Drawing change:
The stove may only be installed by an autho-
rised/qualified RAIS dealer/installer.
See www.rais.com for a list of dealers.
Corrections:
Improvement proposal:
NOTE:
attika
RAIS/
– User manual for Nexo
Designer:
Project man
ksj
Established:
06-04-2018
14
Bend Tool:
OV
UV
Publicité
Chapitres
