Télécharger Imprimer la page

Publicité

attika
English
RAIS/
– User manual for Nexo

Installation

It is important that the stove is correctly installed in consideration to both the environ-
ment and safety.
The stove is placed on non-combustible material and is free standing on the floor.
The stove may only be installed by an authorised/qualified RAIS dealer/installer other-
wise the warranty is invalidated.
When installing the stove, all local rules and regulations, including those referring to
national and European standards, must be followed. Local authorities and a master
chimney sweep should be consulted before installation.
No unauthorised modifications may be made to the stove.
NOTE!
Before using the wood-burning stove, the local chimney sweep must be notified of the
installation.
There must be plenty of fresh air in the room where you are installing the stove to en-
sure good combustion – possibly through an airbox connection. Note that any mechan-
ical ventilation, e.g. via an extraction hood, may reduce air supply. Any air grates must
be positioned such that air supply is not blocked.
The stove has an air consumption of at least 14.4m ³ /hour.
The floor structure must be able to bear the weight of the wood-burning stove and
chimney, where relevant. If the existing structure does not fulfil this condition, suitable
measures must be taken (e.g. installation of a load distribution plate).
Consult a professional building expert.
If the stove is installed on a combustible floor, the national and local provisions must be
followed with consideration to the non-combustible layer covering the floor.
The stove must be placed a safe distance from combustible material.
Ensure that no combustible objects (e.g. furniture) are placed closer than the distance
specified in the following section on installation (fire risk).
attika
When deciding where you want to place your RAIS/
wood-burning stove, you
should consider heat distribution to other rooms. This will allow you to get the best
possible enjoyment from your stove.
See the manufacturer's plate on the wood-burning stove.
Inspect the stove for defects immediately upon receipt.
13

Publicité

loading

Ce manuel est également adapté pour:

Nexo 100Nexo 120Nexo 100 - side glasNexo 120 - side glas