Proper Use; Safety Instructions - Scheppach 3906101704 Traduction Du Manuel D'origine

4. Proper use

Compressed-air hose
The compressed-air hose is designed for supplying
air to air tools.
Compressed-air gun
The blow-out pistol is designed for cleaning and
blowing out hollow spaces or hard-to-reach areas, as
well as for cleaning soiled equipment. The infinitely
variable trigger lever allows an exact dosing of com-
pressed air.
Tire pressure gauge
The tire pressure gauge allows you to inflate tires
easily and exactly. Use the pressure gauge to check
the tire pressure. If the tire pressure is too high, you
can reduce the pressure with the integrated relief
valve. After filling with air, please check the set tire
pressure with a calibrated gauge, for example at a
petrol station.
Paint spray gun with gravity-feed can
The paint spray gun with cup is designed for spraying
paints and lacquers. The pain spray gun is ideal for
all small scale priming and painting work. The adjust-
ment of the air and paint volumes helps to achieve
outstanding results. The paint spray gun, with an
infinite adjustment from wide to round jet, is ideal for
both large areas and for corners and edges. Check
the setting on a sample painting.
Note that abrasive, acid and fuel-containing materials
must not be processed.
Compressed-air gun + suction-feed can
Suitable for spraying cold cleaner, spray oil, etc. The
infinitely variable trigger lever allows an exact dosing
of the spray material. The rotating nozzle allows you
to adjust the ratio of fluid to the volume of air.
Tip: Before starting work, you should conduct a
small test on newspaper to find the ideal settings for
achieving perfect results.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications. Our warranty will be voided if the machine
is used in commercial, trade or industrial businesses
or for equivalent purposes.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of any
kind caused as a result of this.

5. Safety instructions

These operating instructions provide places concern-
ing your safety which are marked with this indication:
m
Furthermore this manual contains other important
sections which are marked with the word „
tion!
".
m Attention!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002- 58 internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002- 58
Please read the complete operating instructions
and safety regulations with due care. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions and the safety instructions.
m DANGER
Failure to follow these instructions may cause seri-
ous danger to life of danger or fatal injuries.
m WARNING
Failure to follow these instructions may cause danger
to life or danger of serious injuries.
m CAUTION
Failure to follow these instructions may cause light to
medium risk of injury.
m NOTE
Failure to follow these instructions may cause danger
of damage of the engine or other property values.
General safety informations
1. Keep your work area tidy
2. Take environmental influences into account
3. Keep other persons away
4. Securely store unused electric tools
5. Avoid abnormal working postures
6. Work in full consciousness
This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the tool by a person responsible for
their safety (local regulations can restrict the age of
the operator)
Align the air tools away from yourself or other people
or animals. Solvents or diluents can etch skin, lungs
and eyes.
Atten-
For your own safety always use the quick coupling
adaptor to connect the air tools to the air supply and
always regulate the working pressure by using a
pressure regulator. Do not exceed the max. permitted
working air pressure. Please refer to the Technical
Data.
• Disorder in the work area can lead to accidents.
• Make sure that the work area is well illuminated.
• Do not allow other persons to work with the de-
vice especially children and young people.
• Unused tools should be stored in a dry, elevated
or closed location out of the reach of children.
• In use of the device ensure on your secure foot-
ing.
• Do not work with the device when you are under
the influence of alcohol, drugs, medication or
other substances which might compromise the
vision, dexterity and judgment.
GB
15/40