Introduction; Layout; Scope Of Delivery - Scheppach 3906101704 Traduction Du Manuel D'origine

GB

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
We recommend:
1 Read through the complete text in the operating
instructions before installing and commissioning the
device.
2 The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations..
3 The operating instructions contain important
information on how to operate the machine safely,
professionally and economically, how to avoid dan-
ger, costly repairs, reduce downtimes and how to
increase reliability and service life of the machine.
4 In addition to the safety regulations in the operat-
ing instructions, you have to meet the applicable
regulations that apply for the operation of the ma-
chine in your country.
5 Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruc-
tion manual each time before operating the machine
and carefully follow its information. The machine can
only be operated by persons who were instructed
concerning the operation of the machine and who are
informed about the associated dangers. The mini-
mum age requirement must be complied with.
6 In addition to the safety requirements in these
operating instructions and your country's applicable
regulations, you should observe the generally rec-
ognized technical rules concerning the operation of
identical constructed machines.
14/40
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002- 58

2. Layout

Paint spray gun with gravity-feed can
1a Nozzle
1b Paint Flow Regulator
1c Trigger
1d Paint Container
1e Flow Regulator
1f Quick Coupling Connector
Tire pressure gauge
2a Manometer
2b Deflation Button
2c Quick Coupling Connector
2d Trigger
2e Valve Connection
Compressed-air gun + suction-feed can
3a Nozzle
3b Container
3c Trigger
3d Quick Coupling Connector
Compressed-air gun
4a Nozzle
4b Trigger
4c Quick Coupling Connector
Compressed-air hose
5a Air Tool Connection
5b Quick Coupling Connector

3. Scope of delivery

• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available)
• Check that the delivery is complete.
• Check the device and its spare parts for possible
damage caused by transportation. In the event of
complaints, you must contact the distributor without
delay. Claims at a later stage will not be accepted.
• If possible, store the packaging until the warranty
period has expired
• Before handling the device, make yourself familiar
with it by reading the operating instructions.
• For accessories, consumables and spare parts,
only use original parts. Spare parts are available
from your stockist.
• Include our item number, the device model and
year of manufacture in your order.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts!
m Danger
There is a risk of swallowing and suffocation!