Cleaning; Quick Start Guide; Positioning The Appliance - DEJELIN NutriVac NV280 Série Mode D'emploi

CLEANING

IMPORTANT
always unplug the NutriVac before
cleaning it and wait until the sealing
bar has cooled down completely
If liquid accidentally gets
inside the structure, do not plug
the appliance in. Do not use the
appliance and contact the after-
sales service centre
EN
Before and after using the NutriVac,
clean the external surfaces with a
damp sponge and mild detergent
(non-abrasive, solvent-free).
Remove the compression and other
seals and clean them with a damp
sponge and mild, non-abrasive
detergent. Leave to dry completely
before refitting them.
When clean and dry, carefully put
the seals back in their respective
locations.
60

QUICK START GUIDE

POSITIONING THE APPLIANCE

Place the appliance in a dry place
and on a horizontal surface, making
sure that the work area in front of the
appliance is free from obstacles.
The work area must be large enough
for the bags with the packed foods.
Plug the power lead into an earth
connection matching the appliance's
voltage (see technical specifications).