Inserting The Batteries In The Remote Control; Installing The Sound Bar - Medion LIFE E64058 Mode D'emploi

6. Inserting the batteries in the remote control

The remote control is supplied with a 3V CR2025 lithium battery already
inserted.
NOTE
When you use the remote control for
the first time, pull out the transpar-
ent strip without opening the battery
compartment.
If the product fails to respond or is slow to respond
to the remote control, you will need to change the
battery. Proceed as follows to change the battery:
1. Press the catch (b) and remove the battery
holder complete with battery (a) from the re-
mote control. Comply with the legal require-
ments when disposing of the used battery.
2. Insert a new 3V CR2025 battery in the holder
(c) with the positive terminal facing upwards.
Always make sure the battery is the right way
round.
3. Push the battery holder complete with battery
back into the remote control slot (d) as far as it will go.

7. Installing the sound bar

There are three different ways in which you can use the sound bar:
upright as two tower loudspeakers, horizontal or mounted on the wall.
b
a
c
d
91 of 104
DE
FR
NL
EN