Network Configuration; Connecting To A Power Supply; Using The Device For The First Time; Select Language - Medion LIFE E85038 Mode D'emploi

automatically assign the device a network IP address.
• If your router is configured in this way, you can connect your WLAN radio to the
network without further action.
8. Network confi guration
The network configuration for the Internet radio is entered in WLAN mode
(wireless).
• If you have a wireless 802.11 b/g/n network, you can connect the Internet radio
to the Internet via Wi-Fi:
On first use, you will need to select an access point (AP) and, if necessary, enter
the network key. The radio will then always tune in to this AP automatically. A
message will appear if the device is unable to find the AP.

9. Connecting to a power supply

 Plug the mains cable supplied (model number YN12W-1200080VZ) into the DC
IN socket on the device.
10. Using the device for the fi rst time
 On first use, confirm the query SETUP WIZARD START NOW? with
YESto start the setup wizard. .
NOTE!
If you select NO, you can specify in the next display whether the wizard
should start the next time you switch on the device.

10.1. Select language

 Select the desired language by turning the dial and press it to confirm the
language.

10.2. Setting the time and date

In the menu select 12/24 TIME FORMAT 12 or 24.
•
• Specify whether the time is to be updated automatically via FM reception
(UPDATE FROM FM) or via the network (UPDATE FROM NET).
Setup wizard
Start now?
NO
YES
DE
FR
NL
EN
141 of 166