Connections; Resetting The Device In Case Of Malfunction - Medion LIFE E85038 Mode D'emploi

4.3. Connections

 WLAN mode: The device has an integrated Wi-Fi antenna.
 Operation of the FM radio: Align the aerial towards the rear of the device for
reception.
 Mains adapter: Connect the connector plug on the mains adapter (supplied) to
the DC IN port and plug the mains power plug into an AC 100–240 V ~ 50/60 Hz
socket.
 LINE OUT: Connect a 3.5 mm stereo jack to the LINE OUT socket to transfer the
stereo sound output of the Internet radio to other audio devices.
 AUX IN: Connect a 3.5 mm stereo jack to the AUX IN socket to play back stereo
sound output from other audio devices via the Internet radio.

4.4. Resetting the device in case of malfunction

If your device does not respond, disconnect the device from the mains by pulling
out the mains plug. Connect it to the mains again after a few seconds.
Then reset the menu settings to the factory settings by accessing the menu
SYSTEM SETTINGS -> FACTORY RESET and confirming the prompt with
YES .
You will have to repeat the installation process.
NOTE!
Please note that all settings, e.g. the network WEP key, will be
irretrievably lost and will need to be input again after the device has
been reset.
DE
FR
NL
EN
135 of 166