IWC Schaffhausen Ingenieur Dual Time 3244 Mode D'emploi page 38

r e M O v i n g i n d i v i d u a l l i n k s a n d a t t a c h i n g
is sitting correctly.
Keep the surplus links and separating tool in a safe place for use
in any adjustments at another time.
— 3 8 —
t h e B r a c e l e t
Repeat steps 1 to 3 at the distance from
the first point of separation you have just
determined. Remove the unnecessary links
and reassemble the shortened bracelet.
Slide the hinged link into the bracelet side-
ways (1).
Using the special tool provided, you can
now push down the fixing bolt (2) and at
the same time, slide the hinged link back
into the bracelet until it lies flush (3).
The fixing bolt must be aligned with the
upper edge of the securing link. It is im-
portant that you check that the hinged link
i n g e n i e u r d u a l t i M e