Before Fi Rst Use - Cleanmaxx Z 03334 Mode D'emploi

Not shown:
Adapter bracket
The adapter bracket can be mounted on the telescoping tube. You can store the cushion
nozzle as well as the tile and brush nozzle by clipping them into the adapter bracket.
Before fi rst use
Before fi rst use
Before you can use the device, you must:
• unpack the product contents,
• assemble the device.
Unpacking the product contents
ATTENTION!
• Keep children away from the packaging. Danger of suffocation exists!
• Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents") and check for any damages from transport. If you identify damages
to the components, do not use them (!), instead contact our customer service centre.
• Please keep in mind: Any dirt residue in the dust bin is attributed to previous testing
of this device before delivery and does not constitute a defect!
Assembly
ATTENTION!
• The device must always be switched off when you want to assemble or disassemble
the device or replace the accessory nozzles.
19
Tile and brush nozzle (fi gure similar)
Flip the end piece towards the arrow and the tile nozzle
will become a brush nozzle:
• The tile nozzle is suitable for cushions, cleaning the
inside of passenger vehicles as well as all nooks and
crannies that can't be reached with other nozzles.
• The brush nozzle is suitable for all uneven objects,
furniture, lamps, profi ling strips and baseboards,
window sills etc.
1. Insert the suction hose in the suction hose port. It must
audibly lock into place. To remove the hose, push the two
catches on the side of the suction hose and at the same
time, pull it out of the suction hose port.
EN