Before Fi Rst Use; Inserting/Removing The Suction Tube - Cleanmaxx PC-C001-6 Mode D'emploi

11
10
9
8
7
6
1 Motor fi lter (located behind the dust
bin in the vacuum cleaner housing)
2 Button for re-coiling the mains cord
3 On/Off switch
4 Exhaust fl ap with exhaust fi lter (loca-
ted behind the exhaust fl ap)
5 Mains cord with mains plug
Before fi rst use

Inserting/removing the suction tube

B A
Inserting the telescoping tube
17
6 Floor nozzle
7 Telescoping tube
8 Suction hose
9 Dust bin fastener
10 Dust bin
11 Release button for the dust bin
1. Insert the end of the suction tube in the port (A) on the
front of the device. It must audibly lock into place.
2. To remove the suction tube, you must depress and hold
the two release buttons (B) on the end of the tube and pull
out the tube at the same time.
1. Insert the handle in the straight end of the telescoping
tube. For better seating, gently turn the tube back and
forth in the process.
EN
1
2
3
4
5