Cleaning The Housing And Nozzles; Storage; Technical Data - Cleanmaxx PC-C001-6 Mode D'emploi

2. Remove the exhaust fi lter.
3. Shake out the fi lter over an open garbage can.
4. If needed, clean the fi lter with lukewarm warm water and allow it to dry completely.
Do not in any case insert the fi lter if it is still damp.
5. After cleaning and/or drying the exhaust fi lter, place it back in the exhaust fl ap and
close the fl ap. It must audibly lock into place.

Cleaning the housing and nozzles

1. If needed, clean the housing with a damp, soft cloth. Then dry it with a soft cloth.
2. Regularly remove hairs and lint from the nozzles.

Storage

• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for child-
ren and animals.
E

Technical data

Model:
Product no.:
Voltage supply:
Output:
Protection class:
• If not in use, you can attach the tile and brush nozzle to
the bracket provided on the handle as shown.
• For convenient storage, you can push the telescoping
tube all the way together and push the hook (E) on the
fl oor nozzle into the bracket (F) on the carrying handle.
F
PC-C001-06
06250 (red-silver-black)
06958 (black-rosegold)
220 – 240 V ~ 50 / 60 Hz
900 W
II
21
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost
varies depending on the service
provider.)
EN