Troubleshooting; Disposal - Cleanmaxx PC-C001-6 Mode D'emploi

EN

Troubleshooting

If the device should stop working properly, fi rst check whether you are able to correct
the problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The vacuum clea-
ner has no suction
power.
The suction power
is weak.
The device emits
dust when vacu-
uming.
An unpleasant
odour develops
when vacuuming.

Disposal

The packaging material is recyclable. Dispose of the packaging in an environ-
mentally-friendly manner and make it available to the collection service for recy-
clable materials.
Dispose of the product in an environmentally-friendly manner. It does not belong
in the household garbage. Dispose of it at a recycling centre for old electrical and
electronic equipment. For more information, please contact the administration in
your community.
Potential cause/solution/tips
• Is the mains plug properly connected with the socket? Cor-
rect the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the auxiliary air valve on the handle open? Close the valve.
• Is the dust bin too full? Empty the bin.
• Are one or both fi lters heavily laden with dirt? Clean the
fi lter(s).
• Is the attached nozzle, telescoping tube or suction tube
plugged? Turn the device off, pull the mains plug out of the
socket and remove the blockage.
• Has the dust bin been closed properly and inserted in the
device? Correct this if necessary.
• Are you using the device for the fi rst time? An odour often de-
velops when using new devices for the fi rst time. The odour
should disappear once you have used the device a few times.
• Has the device already been used on multiple occasions?
The device is defective. Turn off the device, pull the mains
plug out of the socket and promptly contact customer service.
22
All rights reserved.