Optional Accessories; Sr 40 Single/Dual Receivers; Front Panel Controls - AKG WMS 40 SINGLE Mode D'emploi

WMS 40 SINGLE/DUAL_5.0 08.04.2005
2 Description
Kits with SR 40 DUAL receiver

2.3 Optional Accessories

2.4 SR 40 SINGLE/DUAL

2.4.1 Front Panel Controls

Fig. 1: Front panel controls on
SR 40 DUAL receiver.
16
13:30 Uhr Seite 16
GUITAR/VOCAL SET DUAL
1 PT 40 PRO bodypack transmitter
1 AA size battery
1 set of lettering labels
1 C 444 L head-worn microphone
2 moisture shields
1 W 444 windscreen
1 GB 40 Guitarbug with user manual
1 AAA size battery
1 adapter plug
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
INSTRUMENTAL SET DUAL
2 PT 40 bodypack transmitters
2 AA size batteries
1 set of lettering labels
2 MKG L guitar cables
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
Check that the packaging contains all of the items listed for your system. Should any item be missing,
please contact your AKG dealer.
RMU 40 19" rack mounting kit for two SR 40 SINGLE or DUAL receivers
W 880 foam windscreen for HT 40 PRO
The SR 40 SINGLE/DUAL series includes two stationary non-diversity receivers for use with all WMS 40
Receivers SINGLE/DUAL and Microtools Series transmitters. They feature a half-rack case for mounting in a 19" rack.
The SR 40 SINGLE provides a single reception channel and operates on one fixed, quartz stabilized fre-
quency in the 710 MHz to 865 MHz UHF carrier frequency range.
The SR 40 DUAL combines two SR 40 SINGLE receiver channels in one half-rack case. Each channel
operates on a separate frequency.
1 ON/OFF: On/off pushbutton switch with status LED.
2 Antenna (1 per channel): Fixed-length UHF antenna permanently mounted on the front panel.
3 VOLUME (1 per channel): This rotary control adjusts the receiver's output level from microphone to
line level for matching to the input sensitivity of your mixer or amplifier.
4 RF OK (1 per channel): This LED illuminates to indicate that signal is being received. If no signal is
received or the automatic squelch is on, the RF OK LED goes out and the audio output is muted.
5 AF CLIP (1 per channel): This LED illuminates to indicate the audio level of the received signal is over-
loading the receiver's audio section.
6 Color code lines: The color indicates the carrier frequency of the respective receiver channel. Both
the SR 40 SINGLE and the SR 40 DUAL have two color code lines. On the SR 40 SINGLE, both color
code lines are of the same color. Transmitters tuned to the same frequency are marked with the same
color. Refer to the Manual Supplement sheet for a color code table.
PRESENTER SET DUAL
1 HT 40 handheld transmitter
1 stand adapter
1 semitransparent replacement clip
1 PT 40 PRO bodypack transmitter
2 AA size batteries
1 set of lettering labels
1 C 444 L head-worn microphone
2 moisture shields
1 W 444 windscreen
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
VOCAL SET DUAL
2 HT 40 handheld transmitters
2 stand adapters
2 AA size batteries
2 semitransparent replacement clips
1 SR 40 DUAL receiver
1 AC adapter (see sticker on packaging)
1 Manual Supplement sheet
WMS 40 SINGLE/DUAL