English (Original Instructions) - DeWalt DWS778 Notice D'instructions

CROSS-CUT MITRE SAW
DWS778
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
e
development and innovation make D
partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter
Blade bore
Max. blade speed
Cutting depth
Max. blade thickness
Max. kerf of the saw blades
Mitre (max. positions) left and right
Bevel (max. positions)
Compound mitre
Capacities
cross-cut 90°
mitre 45°
mitre 50°
bevel 45°
bevel 48°
Overall dimensions
Weight
Noise values and/or vibration values (triax vector sum) according to EN62841-3-9
(emission sound pressure level)
L
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN62841
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of
vibration and/or noise such as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of work patterns.
nOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.25 Ohm at the
interface point (power service box) of user's supply.
WALT one of the most reliable
e
DWS778-QS/GB DWS778-LX
V 230 115
V 230 115
3 3
W 1850 1650
mm 250 250
mm 30 30
min -1 4300 4100
mm 85 85
mm 1.75 1.75
mm 3 3
50° 50°
left 48° 48°
bevel 45° 45°
mitre 45° 45°
mm 85 x 305
mm 85 x 215
mm 85 x 198
mm 58 x 305
mm 54 x 305
mm 465 x 615 x 390
kg 17.7
dB(A) 93 90
dB(A) 106 103
dB(A) 3.0 3.0
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
EC-Declaration of Conformity
Machinery Directive
Cross-Cut Mitre Saw
DWS778
WALT declares that these products described under Technical Data are
D
e
in compliance with:
2006/42/EC, EN62841-1:2015 +AC:2015; EN62841-3-9:2015 +AC:2016-09.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For
more information, please contact D
to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
11.07.2019
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
EnGLIsh
WALT at the following address or refer
e
WALT.
e
27