IWC Schaffhausen Ingenieur Mode D'emploi page 23

— 2 3 —
W I N D I N G P O S I T I O N
With the crown in the winding position (0), you can also wind the
automatic movement by hand. A few revolutions of the crown are
enough to start the movement. However, it is better to wind the
watch by turning the crown through approximately 20 revolutions
as this will ensure maximum accuracy.
D AT E A N D D AY S E T T I N G
If a month has fewer than 31 days, you will need to set the date
manually to the first day of the following month. Release the screw­
in crown and pull it out to position 1. You can now set the date
by turning the crown to the right, and the day by turning it to the
left (direct advance). You should not use the rapid-adjustment
function between 8 p.m. and 2 a.m. because the movement
automatically advances the date during this period and the
change mechanism could be damaged.
I N G E N I E U R C H R O N O G R A P H