Clear Paper Jams; Print Cartridge Troubleshooting; Find More Information; Setup Guide - HP Deskjet F2100 Série Guide D'utilisation

Masquer les pouces Voir aussi pour Deskjet F2100 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If you are connecting the HP All-in-One through a USB hub, make sure the hub is turned
on. If the hub is on, try connecting directly to your computer.
Check other printers or scanners. You might need to disconnect older products from your
computer.
Try connecting the USB cable to another USB port on your computer. After you check the
connections, try restarting your computer. Turn the HP All-in-One off and then on again.
If the HP All-in-One is offline, turn the HP All-in-One off and on again. Start a print job.
If necessary, remove and then install the software you installed with the HP All-in-One again.
For more information on setting up the HP All-in-One and connecting it to your computer, see
the Setup Guide that came with the HP All-in-One.

Clear paper jams

For more information about clearing a paper jam, see the onscreen Help.

Print cartridge troubleshooting

If you are experiencing problems with printing, you might have a problem with one of the print
cartridges.
To troubleshoot print cartridges
1.
Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the
copper-colored contacts. Check for possible damage to the copper-colored contacts or ink
nozzles.
Make sure the plastic tape has been removed. If it is still covering the ink nozzles, gently remove
the plastic tape by using the pink pull tab.
2.
Reinsert the print cartridge by sliding it forward into the slot. Then push the print cartridge forward
until it clicks into the socket.
3.
Repeat steps 1 and 2 for the tri-color print cartridge on the left side.
4.
If the problem persists, you may need to print a self-test report or clean the print cartridges. For
more information, see the onscreen Help.

Find more information

A variety of resources, both printed and onscreen, provide information about setting up and using
the HP All-in-One.

Setup Guide

The Setup Guide provides instructions for setting up your HP All-in-One and installing software.
Make sure you follow the steps in the Setup Guide in order.
If you have problems during setup, see Troubleshooting in the last section of the Setup Guide, or
see
"Troubleshooting and support" on page 10
in this guide.
Clear paper jams
13

Publicité

Table des Matières
loading

Table des Matières