Setting The Air Flow Direction; Installing The Exhaust Air Hose - EINHELL MKA 2000M Mode D'emploi

Anleitung MKA 3501 E SPK 1
GB

SETTING THE AIR FLOW DIRECTION

1. Adjusting the horizontal ventilation grille:
The horizontal direction of the air flow is determined
by the horizontal ventilation grille. It has to be
adjusted by hand.
2. Adjusting the vertical ventilation grille:
The vertical direction of the air flow is determined by
the vertical ventilation grille. It has to be adjusted by
hand.

INSTALLING THE EXHAUST AIR HOSE

Use only the supplied exhaust air hose. The length of
the exhaust air hose can be varied from between 300
mm to 1500 mm. For the most effective cooling the
hose should be as short as possible. Avoid kinks are
excessive bends in the hose so that the exhaust air
can be transferred out without hindrance. If you
ignore this advice, the device as a whole may
overheat and shut down. This could result in damage
to the device.
Warning!
The length of the exhaust air hose is matched to the
technical specifications of the device. Never extend
the hose as this could lead to malfunctions or faults
on the device.
14
02.12.2004 10:16 Uhr Seite 14
Right
Right
Wrong
A) Installing the exhaust air hose
through an open window
Foam material (15)
Foam material (14)