Cavist XV3 Manuel D'utilisation page 5

Transportation and Handling
For safe lifting, tilt the appliance backwards by no more
than 45 degrees, hold the base and rear corners of cabinet.
Lift the cooler carefully. Never use the door handles for
lifting. To move the cooler on a flat level surface, tilt it
slightly backwards and push backwards.
This unit is heavy and could cause injury – ensure there are
adequate people present to move the appliance.
II. INSTALLING AND SWITCHING ON YOUR APPLIANCE
Operating voltage for your appliance is 230-240V at 50Hz.
•
Before plugging in the power supply, ensure that the voltage on the rating label corresponds
•
to the working voltage of your electrical system in your home.
Insert the plug into an efficient Ground (Earth) connection. If the socket has no Ground (Earth)
•
contact or the plug does not match, we suggest you call an authorised electrician for assistance.
Place your appliance in an area that is not exposed to direct sunlight.
•
Your appliance should be placed at least 10cm away from stoves, ovens and other heating cores.
•
This appliance should never be used outdoors or left in the rain.
•
When your appliance is placed next to a chest freezer or freezer, there should be at least 10cm
•
between them to prevent humidity on the outer surface.
The appliance must be used in the vertical position and on a flat surface.
•
To level the appliance, use the adjustable feet on the appliance.
•
Do not place your appliance on a carpeted surface as this will prevent adequate ventilation.
•
This appliance should only be placed on a flat, firm surface.
•
Choose a dry and well-ventilated space.
•
The appliance should be positioned so that the plug is easily accessible.
•
Before Switching On
Before using your appliance, add a teaspoon of bicarbonate of soda to warm water and with a
•
damp cloth wipe down all parts of the new appliance, then repeat the process with a clean damp
cloth and dry (ensure the appliance is not connected to the power when performing this task).
Remove all transport tapes and foam protection pieces. Clean the interior with a cloth dampened
•
in lukewarm soap and water. Wipe with clean water and wipe dry.
There may be an odour when you first switch on the appliance, it will disappear when the
•
appliance starts to cool.
When the appliance has been positioned, adjust the feet to ensure the unit is stable. This is
•
essential to ensure quiet running and proper door opening /closing.
Connect to the electrical socket but do not switch the power to the cooler on for at least 3 hours.
•
The coolant within the product needs time to settle after it has been transported and put in to
position, failure to do this will affect the cooling performance of your appliance.