Mac allister MSSP120 Notice Originale page 22

MSSP120
GB
Unpack and positioning
1. Take the machine out of the box.
2. Check all parts for possible transport damage after unpacking. The suppli­
er must be informed immediately in case of complaints. Later complaints
are not accepted.
3. Check the delivery for completeness.
4. Prepare the workplace where the machine is supposed to be placed. Make
sufficient space to ensure safe and trouble-free working. The machine is
designed for use in enclosed rooms and must be placed on an even, firm
and stable surface.
You will need
Installation parts supplied
1 Scroll Saw [00]
1 Blade guard [02]
1 screw M5 for blade guard [2a]
1 self­locking nut M5 [2b]
1 hexagonal spanners SW 3 mm [12]
1 hexagonal spanners SW 4 mm [12]
1 sawblade [13]
1 Operating manual
22
Unpack
Items not supplied
Suitable personal pro­
tectiv equipment (eye
protection, gloves)
1 screwdriver for cross­
head screws