Mac allister MSSP120 Notice Originale page 21

MSSP120
should switch off the saw, pull out the power plug, open the kerf with a
wedge and pull the workpiece free.
Never arrange, glue or assemble any parts on the work table while the
–
saw is running.
Do not switch on the saw until you have cleared all material remnants
–
and tools from the work table. Only the workpiece and any essential
aids (wedge) are to be left on the workpiece.
Keep your fingers a safe distance from the blade.
–
Guide the workpiece securely and firmly and do not loosen your grip at
–
any time.
Warning! This electric tool generates an electromagnetic field during oper­
ation. This field can impair active or passive medical implants under certain
conditions. In order to prevent the risk of serious or deadly injuries, we recom­
mend that persons with medical implants consult with their physician and the
manufacturer of the medical implant prior to operating the electric tool.
SAFETY INSTRUCTIONS FOR THE HANDLING OF SAW BLADES
Only use insertion tools if you have mastered their use.
1
Observe the maximum speed. The maximum speed specified on the in­
2
sertion tool may not be exceeded. If specified, observe the speed range.
Observe the motor / saw blade direction of rotation.
3
Do not use any insertion tools with cracks. Sort out cracked insertion
4
tools. Repairs are not permitted.
Clean grease, oil and water off of the clamping surfaces.
5
Handle insertion tool with caution. They are ideally stored in the origi­
6
nally package or special containers. Wear protective gloves in order to
improve grip and to further reduce the risk of injury.
Prior to the use of insertion tools, make sure that all protective devices
7
are properly fastened.
Prior to use, make sure that the insertion tool meets the technical re­
8
quirements of this electric tool and is properly fastened.
Only use the supplied saw blade for cutting wood, never for the process­
9
ing of metals.
Safety
GB
21