Product Features; Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GHO 14,4 V-LI Professional Notice Originale

OBJ_BUCH-1520-005.book Page 14 Wednesday, September 21, 2016 9:55 AM
14 | English

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Chip ejector (alternatively right/left)
2 Depth adjustment knob (insulated gripping surface)
3 Planing depth scale
4 Chip ejection selector lever
5 Lock-off button for On/Off switch
6 On/Off switch
7 Battery pack*
8 Battery unlocking button*
9 V-grooves
10 Planer base plate
11 Handle (insulated gripping surface)
12 Hex key
13 Button for charge-control indicator*
14 Battery charge-control indicator*

Technical Data

Planer
Article number
Rated voltage
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
*
– during operation and during storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-14.
Typically the A-weighted sound pressure level of the product
is 79 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =3.0 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools
or is poorly maintained, the vibration emission may differ.
1 609 92A 2MP | (21.9.16)
15 Blade drum
16 Clamping element for blade
17 Fastening screw for planer blade
18 Carbide blade (TC)
19 Extraction hose (Ø 35 mm)*
20 Chip/dust bag*
21 Parallel guide*
22 Scale for rebating width*
23 Locking nut for adjustment of rebating width*
24 Fastening bolt for parallel and beveling guide*
25 Angle stop*
26 Locking nut for angle adjustment*
27 Fastening bolt for rebating depth stop*
28 Rebating depth stop*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GHO 14,4 V-LI
3 601 EA0 4..
V= 14.4
-1
min 14000
mm 0–1.6
mm 0–8
mm 82
kg 2.3 –2.5
°C 0...+45
°C –20...+50
GBA 14,4 V ...
AL 18..
GAL3680
This may significantly increase the exposure level over the to-
tal working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-14,
EN 50581.
GHO 18 V-LI
3 601 EA0 3..
18
14000
0–1.6
0–8
82
2.3–2.8
0...+45
–20...+50
GBA 18 V ...
AL 18..
GAL3680
Bosch Power Tools