Product Description And Specifications; Intended Use; Product Features; Noise/Vibration Information - Bosch GSB Professional 21-2 Notice Originale

OBJ_BUCH-909-004.book Page 14 Wednesday, January 13, 2016 11:44 AM
14 | English
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic.

Noise/Vibration Information

Sound emission values determined according to EN 60745-2-1.
Typically the A-weighted noise levels of the product are: Sound pressure level 95 dB(A); Sound power level 106 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined
h
according to EN 60745:
Drilling into metal:
a
h
K
Impact drilling into concrete:
a
h
K
Screwdriving without impact:
a
h
K
Tapping:
a
h
K
2 609 932 948 | (13.1.16)
Machines with electronic control and right/left rotation are al-
so suitable for screwdriving and thread-cutting.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 "Drilling/Impact Drilling" selector switch
3 Thumbwheel for electronic speed preselection
(GSB 21-2 RCT)
4 "Drilling/screwdriving" selector switch
(GSB 21-2 RCT)
5 Rotational direction switch
6 Lock-on button for On/Off switch
7 On/Off switch
8 Thumbwheel for speed preselection
9 Gear selector
10 Button for depth stop adjustment*
11 Auxiliary handle (insulated gripping surface)*
12 Depth stop*
13 Handle (insulated gripping surface)
14 Chuck key*
15 Key type drill chuck*
16 Screwdriver bit*
17 Universal bit holder*
18 Hex key **
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
3 601 ... A9C 0..
2
m/s 5.6
2
m/s 1.5
2
m/s 14.6
2
m/s 1.8
2
m/s –
2
m/s –
2
m/s –
2
m/s –
A9C 5.. A9C 7..
A9C 6.. A9C 8..
5.6 5.4
1.5 1.5
14.6 15.7
1.8 2.2
<2.5
<2.5
1.5 1.5
<2.5 <2.5
1.5 1.5
Bosch Power Tools