Application; Technical Specifications; Scope Of Delivery - Franke AQUA422 2000102700 Notice De Montage Et De Mise En Service

5.

Application

The electronic siphon control unit allows an intelligent, automated and concealed
triggering of flushing with the highest possible hygiene standards and cost-effective
efficiency.
The electronic siphon control unit is a mains-operated urinal flushing system.
The start and end of urination are reliably detected.
6.

Technical specifications

Minimum flow pressure:
Recommended flow pressure:
Maximum operating pressure:
Calculated flow rate:
Volumetric flow:
Flush time:
Operating voltage:
Power consumption:
Switching output:
Protection class:
7.

Scope of delivery

Pos. Quantity
1
2
3
4
5
6
7
8
x
Name
1 Sensor unit
1 Siphon
2 Seals
1 Solenoid valve with closeable water volume regulator
1 Power supply
1 Control unit
1 G1/2 and G1/2 hose connections
1 G1/2 and G3/4 hose connections
1 Installation and operating instructions
1.0 bar
1-5 bar
10 bar
0.30 l/s
0.50 l/s at a flow pressure of 3 bar
Adjustable from 4-15 seconds
230 V AC
0.5 VA
Bistable RPE solenoid valve 6 V
Solenoid valve IP40
Power supply unit IP65
Radar sensor IP 65
Control unit IP55
- 5 -