Troubleshooting; Spare Parts - Franke AQUA422 2000102700 Notice De Montage Et De Mise En Service

14. Troubleshooting

Fault
Water does not flow
Water flows
continuously
Flush time too short or
too long
Water volume too low
Water volume too high – Flush setting incorrect
If you cannot rectify a fault or if it is not in the list, please contact our customer
service department!

15. Spare parts

Description
1 Sensor unit . . . . . . . . . . . . . . . . . . . . .2000105797
2 Siphon . . . . . . . . . . . . . . . . . . . . . . . .2000105798
3 6 V DC solenoid valve . . . . . . . . . . . .2000109416
4 Control unit. . . . . . . . . . . . . . . . . . . . .2030011260
5 Power pack 230 V . . . . . . . . . . . . . . .2000109428
Accessories
Extension cable . . . . . . . . . . . . . . . . .2000101456
Cause
– Water supply interrupted
– Water volume regulator closed
– Power supply interrupted
– Solenoid valve faulty
– Sensor unit faulty
– Control unit faulty
– Dirty solenoid valve
– Solenoid valve faulty
– Flush setting incorrect
– Solenoid valve faulty
– Water volume regulator not
fully open
– Supply pressure too low
– Flush setting incorrect
Order No.
Order No.
- 9 -
Remedy
➯ Restore it
➯ Open it
➯ Restore it
➯ Replace it
➯ Replace it
➯ Replace it
➯ Clean it
➯ Replace it
➯ Set it
➯ Replace it
➯ Open it
➯ Check it
➯ Set it
➯ Set it