Registres Réseau - Adeunis RF DRY CONTACTS Sigfox Guide Utilisateur

sigfox DRY CONTACTS - Guide utilisateur / User guide version V1.2.0
304 Configuration of the input TOR3
305 Configuration of the input TOR4
306 Global operation
307 Number of downling frame per day
3.4.2 Registres réseau
EN
The list of registers below allows you to change the behaviour of the product application. This list is accessible in Provider mode following
execution of the ATT63 Provider command.
These registers must be handled with caution because they could cause problems of communication or of non-compliance with the legislation in
force.
Registre
202 Number of repetition
IMPORTANT: By default, the number of repetitions of the message is always 2; this is the principle of the SIGFOX specifications. Decreasing the
number of repetitions would have impacts on the quality of service without allowing the increase in the number of messages allowed by the
subscription.
Hexadecimal See details of register 302
Hexadecimal See details of register 302
Decimal
Decimal
Description
Default: 0
Allows the product to be switched into one of the following modes:
• 0:PARK MODE
• 1: PRODUCTION MODE
• 2:TEST MODE
• 3: REPLY MODE
Default: 0
Min/Max: 0 to 4
Unit: none
See detail paragraph 4.2
Codage
Decimal Default: 2
Min/max: 0 to 2
Unité: none
Détails
Page 62 of 80