Operation Of The Leds - Adeunis RF DRY CONTACTS Sigfox Guide Utilisateur

sigfox DRY CONTACTS- Guide utilisateur / User guide version V1.2.0

2.3. Operation of the LEDs

Mode
Transmission of frame (test mode only)
Reception of frame (test mode only)
Product in Park mode
Magnet detection process (1 to 6 seconds)
Product start (after detection of the magnet) Off
Switching to the Command mode
Battery level low
Product faulty (return to factory)
Product in production mode
LED red state
Flash at the reception of a downlink frame
Off
Off
Continuously lit
Flashing (1s ON by 30S)
Fixed
50ms on / 30 s off
LED green state
Flash at the beginning of the transmission
cycle
Off
ON from detection of the magnet up to a
maximum of 1 second
Rapid flashing 6 cycles, 100 ms on / 100
ms Off
Continuously lit
50ms on / 30 s off (just after the red LED)
EN
Page 57 of 80