Description Of The Registers; Function Registers - Adeunis RF DRY CONTACTS Sigfox Guide Utilisateur

sigfox DRY CONTACTS- Guide utilisateur / User guide version V1.2.0

3.4. Description of the registers

On switching on the product works according to the last saved configuration (Factory Configuration if it is the first start, or if this configuration
has not been changed). Commands such as Modification TTY<n>=<M> or ATR allow you to change the content of the registers: <n> repre-
senting the number of the register and <m> the value to be assigned. This latter is either a decimal value or a hexadecimal value consistent
with the «encoding» column of the tables below.
Examples:
• ATS300=6 assigns the decimal value 6 in register 300
• ATS302=2 assigns the hexadecimal value 0x02 in register 302
It is imperative to save the parameters with the command AT&W before exiting the Command mode otherwise all changes will be lost.
IMPORTANT: The registers that are not documented (that can appear in the list following the AT/S command) in the paragraphs that follow are
reserved and must not be changed.

3.4.1 Function registers

The list of registers below allows you to change the behaviour of the product application.
Registre Description
300 Transmission period of the Keep Alive
frame
301 Transmission period of event counters
302 Input TOR1 configuration:
303 Configuration of the input TOR2
Codage Détails
Decimal Default: 144
Min/max: 1 to 255:
Units:
X 10min if S306=1
X 10min if S306=2
Decimal Default: 72
Min/max: 0 à 255
Unit:
x 10min if S306=1
x 20s if S306=2
Hexadecimal Default : 0x46
Bits 0 to 3: Type
• 0 = Disabled
• 1 = Input - Periodic Mode - High edge
• 2 = Input - Periodic Mode - Low edge
• 3 = Entrée - Periodic Mode - High and low edge
• 4 = Entrée - Event Mode - High edge
• 5 = Entrée - Event Mode - Low edge
• 6 = Entrée - Event Mode - High and low edge
• 7 =Output (Default state = 1/close)
• 8 = Output (Default state = 0/close)
Bits 4 to 7: Duration of the waiting period
• 0: None
• 1: 10 ms
• 2: 20 ms
• 3: 50 ms
• 4: 100 ms
• 5: 200 ms
• 6: 500 ms
• 7: 1 s
Hexadecimal See details of register 302
• 8: 2 s
• 9: 5 s
• A: 10 s
• B: 20 s
• C: 40 s
• D: 60 s
• E: 5 min.
• F: 10 min.
Page 61
EN
of 80