Tuner Setup; Setting Up Tv Channels; Using Auto Channel Preset; Setting For Skipping Unwanted Channels - Pioneer PureVision PDP-5050SX Mode D'emploi

Tuner Setup

Setting up TV channels

This section describes how to search and set up TV channels
that you can watch under the current conditions. Unless you set
up TV channels using Auto Channel Preset, you may not be able
to tune in those channels.

Using Auto Channel Preset

Auto Channel Preset automatically searches and sets up TV
channels.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Channel Setup". ( /
4
Select "Ant. A" or "Ant. B". ( /
5
Select "Auto Channel Preset". ( /
6
Select "Air" or "Cable". ( /
Channel Setup
Ant. A
Ant. A Auto Channel Preset
Enter Begin Preset
• Channel search automatically starts.
Channel Setup Ant. A
Ant. A Auto Channel Preset
D
• To quit Auto Channel Preset halfway, press D.
7
After Auto Channel Preset has been finished, press
HOME MENU to exit the menu.
• When using the Cable Converter, you may need to manually add
Cable Converter output channels.
09-PDP5050SX-Eng (27-35)
then ENTER)
then ENTER)
then ENTER)
then ENTER)
then ENTER)
Auto Ch. Preset Cable
xxxxxxxxxxxxxxxxxxxxx
Air
2.0 xxxxxxxxxxxxxxxxxxxxx
Cable
xxxxxxxxxxxxxxxxxxxxx
4.0
6.0
D Cancel Home Menu Exit
Auto Ch. Preset Cable
xxxxxxxxxxxxxxxx
One Moment Please ...
• Cable xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx
Cancel Home Menu Exit
27

Setting for skipping unwanted channels

From among TV channels searched and set up using Auto
Channel Preset, you can select channels to be skipped when
CH +/– are operated.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Channel Setup". ( /
4
Select "Ant. A" or "Ant. B". ( /
5
Select "Channel Keep/Skip". ( /
6
Select a channel to be skipped. ( /
Channel Setup Ant. A Channel Keep/Skip
Ant. A Channel Keep/Skip
• For the skipped channel, a check mark disappears.
7
Press HOME MENU to exit the menu.
• To restore skipped channels, use the above procedure except that you
select a skipped channel in step 6.
• When using the Cable Converter, you may need to manually add
Cable Converter output channels.

Setting up TV channels manually

This section describes how to manually set up TV channels that
have not been set up by Auto Channel Preset.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Channel Setup". ( /
4
Select "Ant. A" or "Ant. B". ( /
5
Select "Add Channel". ( /
6
Select a channel number to be added. ( /
• You can also use buttons 0 – 9 to enter a channel
number.
Channel Setup Ant. A
Add Channel
Ant. A Add Channel
0000.000
1
• After ENTER has been pressed, a confirmation screen
appears.
7
Press A to complete the setup processing.
8
Press HOME MENU to exit the menu.
05.2.25, 10:14 AM
then ENTER)
then ENTER)
then ENTER)
then ENTER)
then ENTER)
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
2.0
xxxxxxxxxxxxxxxxxxxxx
4.0
6.0
Home Menu Exit
then ENTER)
then ENTER)
then ENTER)
then ENTER)
then ENTER)
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu Exit
09
27
En