Tuner Setup; Setting Up Tv Channels; Scanning Channels Automatically; Scanning Analog Channels Manually - Pioneer PDP-42A3HD Mode D'emploi

08

Tuner Setup

Setting up TV channels

This section describes how to search and set up TV channels
that you can watch under the current conditions. Unless you set
up TV channels using Scan Channels, you may not be able to
tune in any channels.

Scanning Channels Automatically

You can automatically scan channels for the frequency ranges
available.
1
Press the MENU button.
2 Press the c or d button to move to Tuner Setup, then
press the \ or OK button.

Tuner Setup

Scan Channels

Scan Analog Channel
Scan Digital Channel
Edit Channel List
Move Enter
3
Select Scan Channels and press the \ or OK button.
4
Select Analog Channel Band and press the \ or OK
button.
5 Press the c or d button to select the required signal
source (Air, STD, HRC or IRC), then press the [ or
BACK button.
6
Move to Start by pressing the c or d button and start the
search by pressing the \ or OK button.
Scan Channels
Analog Channel
Now Searching...
Analog Channels 0
Digital Channels 0
Cancel
The scan start. The scanned channels are automatically
stored in order. To stop scanning, press the BACK button.
7
When finished scanning, press the EXIT button.
• When using the Cable Converter, you may need to manually add
Cable Converter output channels.

Scanning Analog Channels Manually

You can choose if you want to store the channels.
1
Press the MENU button.
2
Press the c or d button to move to Tuner Setup, then
press the \ or OK button.
24
En
Return
30%
0
0
3 Press the c or d button to move to Scan Analog
Channel, then press the \ or OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Scan Digital Channel
Edit Channel List
Move Enter Return
4 Move to Channel by pressing the c or d button and
select the channel number by pressing the [ or \
button.
Scan Analog Channel
Band
Channel 2
Name Channel
Fine Tune
Store
Move Adjust Return
5
Press the c or d button to move to Store, then press the
OK button.
• You can receive the selected channel.
6 If you want to edit the channel name, press the c or d
button to move to Name Channel, then press the \ or
OK button.
Scan Analog Channel
Band
Channel
Name Channel
Fine Tune
Store
Move Enter Return
7 Press the c or d button to select a letter (A~Z, a~z), a
number (0~9) or a symbol (space, {I}~! "#$%& ()*+,-./:;
<=>?@[\]^_`). Move to the previous or next letter by
pressing the [ or \ button.
8
When you have finished entering the channel name, press
the OK button.
9 Press the c or d button to move to Store, then press the
\ or OK button.
10
If you want to adjust the tuning, press the c or d button
to move to Fine Tune, then press the [ or \ button to
obtain good picture and sound quality.
Scan Analog Channel
Band
Channel
Name Channel
Fine Tune
Store
Move Adjust Return
11 Press the c or d button to move to Store, then press the
\ or OK button.
Air
Air
0
Air
0