Using The Remote Control Unit To Control Other Devices; Receiver Control Buttons - Pioneer PureVision PDP-5050SX Mode D'emploi

12 Useful Remote Control Features
Using the remote control unit to control
other devices
1
2
48
En
12-PDP5050SX-Eng (46-52)
Mode switch
(with "TV"
selected)
3
48

Receiver control buttons

When a Pioneer receiver is connected to the display, the
receiver can be operated using buttons 1 to 3.
When a non-Pioneer receiver is connected to the display, the
signals for 1 to 3 must first be learned before operating. See
page 46.
1 RECEIVER (STANDBY/ON)
Turns the receiver power on and off.
2 RECEIVER INPUT
Selects the input source connected to the receiver.
3 RECEIVER VOL +/–
Adjusts the receiver volume level. Press VOL + to
increase the volume and VOL – to decrease it.
• (RECEIVER) MUTING
Allows the remote control unit to learn receiver's mute signal. Use
this button when the mode switch is set to a position other than TV.
• The color-highlighted buttons on the remote control can learn the
control signal from another device's remote control.
05.2.25, 11:02 AM