(i.e. good communication between the compu-
ter and the GSM Interface), this option will be
disabled.
¶
This option will allow you to select the Appli-
cation language.
¶
This option will allow you to select the
Figure 18). The release number can be found
on the Microprocessor [ ] label.
This option provides the Help guide.
36
of the GSM Interface (see
PROGRAMMING THE SIM VIA CELLPHONE
This section describes how to program the
. For the parameter descriptions, refer to
Work carefully through the following steps:
1.
phone ON.
2.
telephone numbers can be saved on the SIM-
CARD for the Dialler facility. These numbers
can be saved in the same way as you usually
save numbers in your
However, instead of entering a Name, enter
followed by the Telephone number
position (1 ... 8).
D5<>E=h
x represents the position number (1 ... 8).
.
then turn your Cell-
. Up to 8
.