Area Code (Prefix); Digit To Remove - Bentel Profiline AZ6400 Instructions D'installation

a)
a
. Enter the prefix (Area Code) and Telepho-
ne number, if necessary (this 20 character
field accepts digits and '+' signs).
NOTE: * If local calls
, enter it in the '
in the '
„
Using this field, program the Contact's name.
. Click the relative box (1 through 8) in the
' ' column).
. Enter the Name.
z z z z z
Enter the Telephone number prefix (max. 4 di-
gits) in this field. The prefix will be included in
the Telephone number, when the GSM Interfa-
ce operates on the GSM Network.
z z z z z
If the GSM Interface is connected downstream
30
b
require the
' field and not
' (refer to ' ').
b)
c
to an office switchboard, the Telephone num-
bers (programmed on the Security system)
must be preceded by the switchboard number
(usually one digit). As the switchboard number
is not necessary when the call is sent over the
GSM Network, it must be removed from the
digits that form the Telephone number.
Enter the switchboard number in the
field.
c)