oventrop Unibox ERTL Notice D'utilisation page 37

Unibox E RTL
QUESTION
102273180-V02.06.2019
RESPONSE
- Volume flow and pressure loss may increase.
- Note the pressure loss and noise characteristic of the radi-
ator fittings.
- Configure the bypass valve so that a sufficient amount of
water flows through the system for surface temperature
balance.
- No noise must be perceivable when the valve is closed.
Option 3:
1
Illustr. 14: Connection with "Unibox RLA"
(1) "Unibox RLA"
(2) Bypass valve
- Volume flow and pressure loss may increase.
- Note the pressure loss and noise characteristic of the radi-
ator fittings
- Adjust the "Unibox RLA" bypass valve so that a sufficient
amount of water flows through the surface heating system.
2
Appendix
37