Wilo Stratos MAXO Notice De Montage Et De Mise En Service page 21

Home screen
1 1.1
Radiator - differential pressure Δp-v
Setpoint delivery head
1.0
6.1 m
Normal operation
3
Fig. 2: Home screen
Ite Designation Explanation
m
Main menu Selection of various main menus
1
area
Status area: Reference to ongoing process, a warning or
error, warning error message.
or
Blue: Process or communication status dis-
process infor-
play (CIF module communication)
mation display
1.1 Yellow: Warning
Red: Error
Grey: No processes are running in the back-
ground; there are no warning or error mes-
sages.
Installation and operating instructions Wilo-Stratos MAXO /-D/-Z
2 6
Duty point:
6.9
Δp-v
12.0
Q = 10.3 m³/h
H = 2.0 m
Measured values:
T fluid = 68.2 °C
P elec. = 160 W
W elec. = 42.0 kWh
8
Additional settings
4 5
Ite Designation
m
Headline
2
7
Setpoint dis-
3
play panel
Setpoint edi-
4 tor
Active influ-
ences
5
Reset notifi-
cation
6
Operating
data and mea-
7
sured value
area
Context menu
notification
8
Table 7: Home screen
Explanation
Display of current application and control
mode set.
Display of current setpoints.
Yellow frame: The setpoint editor is acti-
vated by pressing the operating button.
This allows you to change values.
Display influences on the set control mode
e.g. active night setback, No-Flow Stop
OFF (see table "Active influences"). Up to
five active influences can be displayed.
If the setpoint editor is active, this displays
the value set before the value change.
The arrow shows that you can return to the
previous value using the back key.
Displays current operating data and mea-
sured values.
Offers context-based options in its own
context menu.
en-US
21